Randy Landen
Cost $300 + blanks $26-$42)
Class Project: Caricature Carving for all carving levels.
Caricature Carving for all carving levels….beginner to advanced.  Students can pick from a variety of different roughouts for the class.  Roughout prices range from $26 - $42.  Carving techniques with hand tools and knives (no power tools), plus instruction on painting with water-based acrylics and antiquing techniques.  To see more of Randy's carvings visit randy@landenwoodcarving.com

Josh Guge
Cost: $460 + Material/Supply Fee $30 (Wood, eyes, etc.)
Students will carve and paint a detailed Kinglet.

The bird and the opened wing will be carved separately. The wing will be attached at the end of the carving portion of the class. The entire bird will then be painted as one solid piece. Students are encouraged to bring in a (small) premade habitat to mount the bird to in the class. Josh has a picture shown below that gives an example of a good-sized base and branch that work well with the bird. He will provide a study cast for students to use throughout the class. The students have the option of buying the cast at the end of the class.

https://gugeinstitute.com/classes/wood-carving/bird-carving/. 

Class Project: Carving Hand Mirrors

Cost $295 + cost of blank

Both hand and palm tools are helpful (NO POWER). It would be good for each carver to have a bench hook, non-slip matting, white and black graphite paper, pencil and pen. Students may bring a light if they prefer. This class is shallow to medium relief or chip carving. Beginners with some knowledge of carving to advanced are welcome. The wood type blanks are made from range from basswood, butternut, eastern red cedar, cherry, black walnut and tulip poplar. Occasionally other varieties are red oak, white oak, hickory and maple. Blanks are sanded smooth and ready to carve. Students have a choice of flowers, hummingbird and vine or butterfly and flower patterns to trace onto their choice of mirror blank. If students would prefer to use their own design on the mirror it would need to fit within an area 4 ½” to 4 ¾” in diameter. Students work at their own pace with both individual and group instruction. If time allows, a Tung Oil Finish and the mounting of mirrors will be done on finished pieces. Bob will furnish the Tung Oil and Silicone for mounting the mirror. If you have any questions, you can contact Bob at bobcarver49@gmail.com.

Marilyn has been involved in woodcarving since 1990, learning the craft from her grandparents (John & Marilyn Storms) and her parents (Andy & Joyce Anderson), while helping them at their shop, The Knot Hole Woodcarving Studio in Pleasant Hill, MO.  She fell in love with woodburning around 2015 and has been teaching one-day workshops since 2022. She is a Cass County Fair Blue-Ribbon winner and has commissioned dozens of pieces including wildlife portraits, family pet portraits, signage, furniture, ornaments, and pieces for corporate events and displays.

Class Project - Granny Hillbilly

Cost $275 - includes the first blank

While anyone can take this class, it is designed for beginners or carvers who are just getting started in the art of woodcarving.  Students will complete at least one project during the seminar and will have time to start another, including your choice of a basic bear, Santa bear, farmer caricature, eagle relief carving, or eagle relief carving with a flag background, Gnome, etc.  Paints and finishing supplies will be provided for the projects at no additional cost to the student. 

Please bring QUALITY carving tools that are SHARP and ready to carve to class.  If you don’t have your tools, all tools will be available for purchase at the seminar.  Why not let your instructors help you get good tools?  All students are required to wear a safety glove, which will also be available.  When you take Gregg’s class, expect to have a lot of fun, ask a bunch of questions, and have a great time. 

You will take a “field trip” during the seminar to see what other instructors and students are doing and be introduced to our wood supplier and tool vendor. 

This is a fun class to take, see ya at the seminar.  If you have any questions, feel free to call Gregg at (316)258-1828.

Non-Carving Classes Marge Meyer: Quilt Class: 2026 Quilt is ‘Table Runner and Center Piece’ Cost of the Class is $100.00 Contact Marg at 913-782-4811 to register.

Tools:  Safety glove, V-tools, knives, skews, flat gouges, fishtail gouges, and assortment of standard gouges. John's class will be a lesson in medium depth relief carving.  Beginner to advanced carvers are welcome .  No experience is necessary. Students will have a choice of subject matter including architectural, animal, and Christmas themes. No drawing will be required of the student as the subject is already on the piece of wood. Sizes of projects range from 9" x 12" to 12 " x 16" with a few larger projects available if desired. Students work at their own pace with both group and individual instruction.   If time allows, a watercolor painting class will follow.  John provides the paints and brushes for the students to purchase. View John's carvings at www.johnenglerwoodcarving.com. 

Class Project: Large American Indian Bust

Cost $350 + Blanks (Blanks are $60 -$360)

Tools: Safety glove, medium to large mallet gouges.   Vic’s class is amazing.  You will not be carving from a blank, but rather a butternut log.  Vic will rough out your log with a chainsaw.  Your job will be to have an idea of your project when you come to class.  You may carve any subject you desire as long as it is a bust carving.  Vic will help you design your project. Vic started carving in 1991 and has won over 100 awards. 

Contact Vic at vhood@leatherwoodinc.com.  Vic is the president of a unique building corporation that specializes in the restoration of historic buildings. 

TBD

Class Project: Carver’s Choice

Cost $360 + blank ($40 to $55)
Tools: Safety glove, wood burner, paints, knife, #3 and #5 gouges, 1/2" and 1/4" U gouges, and veiners in sizes 3/16", 1mm and 2mm. Debbe's class is a learning experience combined with fun. Her class will focus on anatomy, expression and mood, muscle structure, hair texture, movement, and painting to create the realism for which she is known.  Much attention is also given to expression, thus putting life in your animal's eyes.  Debbe teaches through a combination of group discussions along with individual instruction.

Debbe Edwards has been teaching woodcarving classes for 30 years.  She began carving in 1990 and has won numerous Blue Ribbon and Best of Show awards at Woodcarving Shows and Fine Art Shows.  Debbe is nationally known for her realistic animals.  Classes are taught through group demonstration, and individual help.

You can view some of her works on her website:  www.debbeedwards.com

Join Pat for a festive journey into the Art of Carving & Painting a Santa figure!
All Students will be working on the Same Santa side-by-side to ensure no one misses out on any of her “Tried & True” Techniques. Create a piece that’s not only beautiful but also a testament to your newfound skills. The Santa selected was designed specifically by Pat for enthusiasts of all levels to Carve & Paint a charming Santa figure from Start to Finish during this week’s session.  Pat, renowned for her meticulous attention to detail & vibrant use of color, will guide you through each step, ensuring a rewarding and enjoyable experience.
 
Learn Pat’s efficient carving techniques along with basic human anatomy, layout & texturing. Discover the secret to creating happier, pleasing Santa faces. Then implement her painting techniques designed to help take the mystery out of this important step. 
Tools suggested are a cut resistant glove, your favorite carving knives, hand/palm tools (such as various sized V-tools, Veiners & U-gouges).  Pat will supply all Acrylic paints, but feel free to bring your favorite brushes; otherwise she will have plenty to share. 
Sign up today & create a Santa figure that will spread Holiday Cheer for years to come!